Gradall Forklift Part

Gradall Forklift Part - The Gradall excavator was the creation of two brothers Koop and ray Ferwerda. The excavator was created In the 1940's through World War II, when there was a scarcity of workers. Partners in a Cleveland, Chula Vista construction business called Ferwerda-Werba-Ferwerda, the brothers faced a huge dilemma when numerous men left the workforce and joined the military, depleting existing workers for the delicate grading and finishing work on highway projects. The Ferwerda brothers decided to make a machine which will save their business by making the slope grading job less manual, easier and more efficient.

The very first excavator prototype consisted of a machine with two industrial beams on a rotating platform fixed to a used truck. There was a telescopic cylinder that was used to move the beams backward and forward. This enabled the fixed blade at the far end of the beams to push or pull the dirt. Soon enhancing the initial design, the brothers made a triangular boom so as to add more strength. Additionally, they added a tilt cylinder that let the boom rotate 45 degrees in both directions. A cylinder was positioned at the rear of the boom, powering a long push rod to enable the machinery to be equipped with either a bucket or a blade attachment.

Gradall introduced in the year 1992, with the introduction of the new XL Series hydraulics, the most ground-breaking adjustment in their equipment since their creation. This new system of top-of-the-line hydraulics allowed the Gradall excavator to deliver high productivity and comparable power to the more traditional excavators. The XL Series put an end to the original Gradall equipment power drawn from low pressure hydraulics and gear pumps. These traditional systems effectively handled finishing work and grading but had a difficult time competing for high productivity jobs.

Gradall's new XL Series excavators showed more ability to lift and dig materials. With this series, the models were made along with a piston pump, high-pressure system of hydraulics which showed noticeable improvement in boom and bucket breakout forces. The XL Series hydraulics system was also developed along with a load-sensing capability. Traditional excavators use an operator in order to pick a working-mode; where the Gradall system can automatically adjust the hydraulic power for the task at hand. This makes the operator's general job easier and also conserves fuel simultaneously.

As soon as their XL Series hydraulics came onto the market, Gradall was basically thrust into the highly competitive market of machinery meant to deal with pavement removal, excavation, demolition and various industrial tasks. Marketability was further improved with their telescoping boom due to its exclusive ability to better position attachments and to work in low overhead areas.

Click to Download the pdf

Forklift Parts

Forklift Fuel Tank

Fuel Tanks for Forklift - Several fuel tanks are fabricated by experienced metal craftsmen, although the majority of tanks are manufactured. Restoration and custom tanks can be found on automotive, tractors, motorcycles and aircraft. There are a series of certain requirements to be followed when constructing fuel tanks. Usually, the craftsman sets up a mockup to be able to find...

More

---

Attachment for Industrial Forklift

Industrial Forklift Attachment - Lift truck platforms offer a lot more flexibility for those who work off of a forklift. These platforms are helpful machinery because they provide a high level of safety for workers above them as well for the those below. Forklift platforms are an economical answer for businesses as they are much more cost effective compared to...

More

---

Daewoo Forklift Parts

Daewoo Forklift Parts - Kim Woo-Jung, the son of Daegu's Provincial Governor, established the Daewoo group during March of 1967. He first graduated from the Kyonggi High School and then went onto the Yonsei University in Seoul where he finished with an Economics Degree. Daewoo became among the Big Four chaebol within South Korea. Growing into a multi-faceted service conglomerate...

More

---

Diesel Boom Lift Attachment

Diesel Boom Lift Attachment - A lift truck is a helpful device if your very own business requires the transferring, unloading and loading of very heavy items such as in a manufacturing facility or a warehouse operation. To be able to safely reposition cargo or transport supply, a lift truck is a vital thing for anybody to have at their...

More

---

Grapple for Forklift

Forklift Grapples - On excavators, grapples could be used along with the crowing operation of the bucket cylinder. They could mount directly to the jib and could be utilized whenever handling and processing domestic and aggregate waste materials, timber and construction materials. The grapple's boxed design has added support bridging. This particular manufactured design provides the grapple with maximum strength...

More

---

Forklift Seats

Seat for Forklift - A sturdy surface to sit down is known as a seat. These Seats are usually raised above floor level and nearly all seats use four legs and could carry a single individual. A stool is a kind of seat which does not have a back or any arm rests. A seat that has folding action and...

More

---

Clark Forklift Part

Clark Forklift Parts - Presently, there are over 350,000 Clark lift trucks performing globally, and in excess of 250,000 in commission in North America alone. With five main lines across the world, Clark is proud to be one of the most expansive companies in the industry. Heavy duty vehicles ranging from 1,500lb to 18,000lb capacities, duel fuel, petrol, LPG, hand-driven...

More

---

Compact Scissor Lift Attachments

Compact Scissor Lift Attachment - Scissor lifts offer the ability to be able to raise goods or people to a higher level. They are often used in the retail and construction trades. These platform lifts work on the premise of lowering or raising a platform. Scissor hoists include the scissor legs positioned under the platform, the lower frame assembly and...

More

---